Lavender Shea Butter Soap
Last updated: October 2026

Lavender shea butter soap: what it is and what goes into it
A hard, creamy cold-process bar. Baraka's lavender shea butter soap is a cold-process bar for everyday washing, made from shea butter, coconut oil, olive oil and castor oil and scented with lavender essential oil, with shea butter handmade by the women of the Konjeihi Women's Enterprise Centre in Ghana's Upper West Region. The shea butter adds conditioning and a creamy texture, the coconut oil gives a rich lather, and the glycerin formed as the soap is made stays in the finished bar. The recipe makes about 4 lb (1,814 g) of soap, which cuts into 8 to 10 bars, and the bars cure for 4 to 6 weeks before use.
The method is classic cold process, built on the steps in How to Make Shea Butter Soap, our guide to the basic shea butter bar. For shea butter across balms, butters and soaps, the Definitive Guide to DIY with Shea Butter covers the ingredient in depth. This bar suits anyone who has made cold-process soap at least once: the batter comes together in under an hour, and the weeks of cure that follow do the rest.
In This Recipe:
- What This Recipe Is For
- Why Make This Yourself
- Why These Ingredients Work Together
- Ingredient by Ingredient
- Before You Begin: Soap-Making Safety
- Lavender shea butter soap recipe: ingredients by weight
- How to make lavender shea butter soap
- Troubleshooting
- Storage and Shelf Life
- Scaling and Substitutions
- Customisation Ideas
- Essential Oils
- Application Tips
- What We Know and How We Know It
- FAQ
- Shop the Baraka Ingredients in This Recipe
- Try These Next
What This Recipe Is For
Everyday washing, with a lavender scent. This bar is made for daily use on hands, face and body, and for anyone who wants to learn cold process on a balanced four-oil base. Typical uses:
- Everyday hand and body washing with a rich, creamy lather
- Replacing a synthetic detergent bar with a traditional, handmade soap
- Adding a lavender scent to a daily wash routine
- Learning cold-process soap making with a forgiving four-oil recipe
- Making a batch of handmade gifts, once the bars have fully cured
Why Make This Yourself
Intermediate skill, 8 to 10 bars. Making it yourself gives you full control over every oil and the scent, and a batch of about 4 lb (1,814 g) of soap from about 45 minutes of hands-on work. There is a real satisfaction in watching a liquid mixture of oils and lye turn into a solid, lathering bar over a few weeks. Skill level: intermediate, because the process is forgiving on scent and mould choice but the lye and water must be weighed exactly.
The honest difference from a shop-bought bar is in what it is made of. In cold process, the glycerin formed when the oils react with the lye stays in the bar, while in large-scale kettle soapmaking it can be separated out, and many shop-bought "beauty bars" are made with synthetic detergents rather than soap. Many people who switch to a cold-process bar report that it feels gentler on their skin. A shop-bought bar wins on convenience, consistency and cost per wash; this one wins on knowing exactly what is in it, so choose by whichever of those matters more to you.
Why These Ingredients Work Together
Two hard fats, two liquid oils. The bar balances conditioning oils with cleansing and lathering ones. Shea butter and coconut oil make up two thirds of the oils and give the bar its hardness, while olive oil and castor oil soften its feel and build the lather. Together they make a bar that is hard enough to last but mild enough for daily use, finished with the scent of lavender essential oil.
| Oil | Weight | Share of the oils | What it does in this bar |
|---|---|---|---|
| Shea butter | 1 lb (454 g) | 33% | Hardness, a creamy lather and a conditioning feel |
| Traditional coconut oil | 1 lb (454 g) | 33% | Hardness, cleansing and big, bubbly lather |
| Olive oil | 8 oz (227 g) | 17% | A mild, conditioning feel and a slower trace |
| Castor oil | 8 oz (227 g) | 17% | Boosts and steadies the lather |
Coconut oil sits at a third of the oils here. Soapmakers usually keep it between about 20% and 30% of the oils, because above about 35% a bar starts to feel drying, and at 33% this recipe leans on the shea butter and olive oil to keep the balance. That is also why the coconut oil should not be raised without rebalancing the other oils and recalculating the lye.
Ingredient by Ingredient
Each ingredient has one main job. Here is what every ingredient contributes and why it is in the recipe.
- Shea butter. This is the ingredient the recipe is built on, and the reason to use Baraka's Raw Shea Butter: it is unrefined, strained and filtered only, with no refining, bleaching or deodorising. In soap it adds hardness and a smooth, creamy lather, and it helps keep the finished bar from feeling drying alongside the cleansing oils. Unrefined shea butter ranges from ivory to pale yellow with a mild nutty smell, which can give the bar a soft cream tint.
- Traditional coconut oil. Baraka's Traditional Coconut Oil is a virgin coconut oil, pressed from the fresh kernel of the coconut with no solvent extraction and no chemical refining. In soapmaking it contributes hardness and abundant lather, and it is the main cleansing oil in this bar.
- Olive oil. A mild, conditioning oil that softens the feel of the bar. It also slows trace a little, which gives you more working time before you pour.
- Castor oil. Used here to boost and steady the lather that coconut oil starts, so the bubbles last longer in use. At 17% of the oils it is on the high side, which is why the bar can feel slightly soft when it first comes out of the mould.
- Sodium hydroxide (lye). The alkali that turns the oils into soap. It is used up as the soap forms and cures, with about 5% of the oils left over as a superfat, so a fully cured bar holds no free lye.
- Distilled water. Dissolves the lye. Distilled water is used because the minerals in tap water can affect the soap, and most of it evaporates during the cure.
- Lavender essential oil. Gives the bar its scent. Its main scent compounds are linalool and linalyl acetate, according to a 2011 review of lavender oil constituents in Planta Medica and a review of Lavandula angustifolia oil in Pharmacia.
Where the shea butter comes from
Baraka's shea butter is made by hand by women's producer groups at the Konjeihi Women's Enterprise Centre in Wa, in Ghana's Upper West Region, where Wayne Dunn has worked directly with the women for over 15 years. The shea kernels are cracked, roasted, milled to a paste, kneaded with water and boiled so the fat separates, then cooled and filtered, with no solvent used at any stage. You can follow each step in How is Handcrafted Shea Butter Made?, and see what the work funds in Baraka's Social and Environmental Impact Report. The certificate of analysis for a batch is available on request.
Before You Begin: Soap-Making Safety
Lye is caustic, so gear up first. Sodium hydroxide is caustic as a solid and in solution, and raw soap batter stays caustic until it has saponified. Follow these rules every time you make this soap:
- Wear protective gloves and eye protection whenever you handle lye.
- Work in a well-ventilated area: open a window or work near an extractor fan.
- Always add lye to water, never water to lye.
- Keep lye, raw soap batter and curing soap well out of reach of children and pets.
- This is an adults-only project from start to finish.
Lavender shea butter soap recipe: ingredients by weight
Four oils, lye, water and lavender. Baraka's lavender shea butter soap recipe uses 1 lb (454 g) shea butter, 1 lb (454 g) coconut oil, 8 oz (227 g) olive oil, 8 oz (227 g) castor oil, 6.7 oz (191 g) sodium hydroxide (lye), 13.5 oz (382 g) distilled water and 1 tbsp (15 ml) lavender essential oil. This makes about 4 lb (1,814 g) of soap, or 8 to 10 bars. The lye and water amounts only suit these exact oils and weights, so re-run them through a soap calculator if you change anything.
Prep time is about 45 minutes, the soap sets in the mould for 24 to 48 hours, and the bars cure for 4 to 6 weeks. Skill level: intermediate. The batter weighs about 4 lb 5 oz (1,948 g), and some of its water evaporates during the cure, which brings the finished soap to about 4 lb (1,814 g).
Ingredients

- Shea butter: 1 lb (454 g)
- Traditional coconut oil: 1 lb (454 g)
- Olive oil: 8 oz (227 g)
- Castor oil: 8 oz (227 g)
- Sodium hydroxide (lye): 6.7 oz (191 g)
- Distilled water: 13.5 oz (382 g)
- Lavender essential oil: 1 tbsp (15 ml)
Equipment: a digital scale that reads in grams, a heat-resistant plastic or stainless steel jug for the lye solution, a stainless steel pot, a stick blender, a thermometer, silicone spatulas, a loaf mould that holds about 4 lb (1,814 g) of soap, and gloves and eye protection. Never use aluminium for the lye or the batter, because it reacts with lye.
Lye calculation
The lye is calculated from the oils, never copied from another recipe. Each oil's weight is multiplied by its sodium hydroxide value, the results are added up, 5% is taken off as a superfat, and the water is set at twice the lye.
| Oil | Weight | Sodium hydroxide per gram of oil | Sodium hydroxide |
|---|---|---|---|
| Shea butter | 1 lb (454 g) | 0.128 | 2.0 oz (58.1 g) |
| Coconut oil | 1 lb (454 g) | 0.183 | 2.9 oz (83.1 g) |
| Olive oil | 8 oz (227 g) | 0.135 | 1.1 oz (30.6 g) |
| Castor oil | 8 oz (227 g) | 0.128 | 1.0 oz (29.1 g) |
| Total before superfat | 3 lb (1,362 g) | 7.1 oz (200.9 g) |
With a 5% superfat, 200.9 g × 0.95 = 190.9 g, which rounds to 6.7 oz (191 g) of lye. The water is twice the lye: 13.5 oz (382 g).
How to make lavender shea butter soap
Mix, blend to trace, mould, cure. Baraka's method for lavender shea butter soap is standard cold process: wear gloves and eye protection, then stir the lye into the distilled water (never the reverse) and let it cool. Melt the shea butter, coconut oil, olive oil and castor oil, and when both are around 100–120°F (38–49°C), pour the lye solution into the oils and blend to trace. Stir in the lavender essential oil, pour into a mould, leave 24 to 48 hours, then cut and cure the bars for 4 to 6 weeks before use.
Directions
- Put on gloves and eye protection before handling lye.
- In a heat-resistant container, slowly add the sodium hydroxide to the distilled water (never the reverse), stirring until fully dissolved. The mixture will heat up, so set it aside in a ventilated area to cool.
- Melt the shea butter, coconut oil, olive oil and castor oil together gently until fully liquid.
- Once the lye solution and the oils are both around 100–120°F (38–49°C), slowly pour the lye solution into the oils, stirring continuously.
- Use a stick blender in short bursts, alternating with hand stirring, until the mixture reaches trace: it will thicken and leave a visible trail when you drizzle it across the surface.
- Add the lavender essential oil and stir until fully combined.
- Pour the mixture into a soap mould, tap gently to release air bubbles, and cover.
- Let the soap set in the mould for 24 to 48 hours before unmoulding.
- Cut into bars once firm enough to handle, then set the bars on their sides in a well-ventilated space to cure for 4 to 6 weeks before use.
Buy the ingredients now
This recipe uses two Baraka ingredients. One click takes both straight to checkout.
- Baraka Raw Shea Butter, 2.2 lb (1 kg): enough for two batches
- Baraka Virgin Coconut Oil, 2.2 lb (1 kg): enough for two batches
Olive oil, castor oil, sodium hydroxide, distilled water and lavender essential oil are not Baraka products; use your usual supplier.
The lavender goes in at trace rather than into the hot oils, so less of its scent is lost to heat.
Troubleshooting
Most problems show up in the first 48 hours. These are the faults that actually happen with this bar, what usually causes them and what to do about each one.
| Problem | Likely cause | Fix |
|---|---|---|
| White powder on the top of the bars (soda ash) | Air reaching the raw soap while it sets | Cover the mould after pouring. On finished bars it is only cosmetic: plane or trim it off once the bars have cured. |
| Batter thickens suddenly and is hard to pour | Lye solution or oils too hot or too cold, or blending too long | Work at 100–120°F (38–49°C), blend in short bursts and hand-stir once trace starts. If it thickens, spoon it into the mould straight away. |
| Oily streaks or a layer of oil in the mould | False trace: the batter was poured before the oils and lye had fully combined, often because the shea butter began to set as it cooled | Blend until the trail holds on the surface, and keep both the oils and the lye solution above 100°F (38°C) when you combine them. |
| Bar too soft to unmould after 48 hours | The high share of olive and castor oil, or a cool room | Leave it in the mould for another 2 to 3 days. The bar firms up steadily during the cure. |
| Lavender scent faint after the cure | Essential oils fade during the cure | Use up to 3 tbsp (45 ml) of essential oil in total for this batch, the safe limit, and wrap the cured bars to hold the scent. |
| Clear streaks through the bar (glycerin rivers) | The batter got too hot in the mould | Cosmetic only and safe to use. Pour at the cooler end of the range next time. |
| Liquid pockets, or a crumbly bar that will not set | Lye or oils weighed wrongly | Do not use the batch. Wearing gloves, wrap it and dispose of it, then re-check the scale and the weights before the next batch. |
Storage and Shelf Life
Cure for 4 to 6 weeks, then keep cool and dry. Cure the cut bars on their sides in a cool, dry, well-ventilated place away from direct sunlight. Do not use the soap before curing is complete, because it needs this time to harden and mellow as the water evaporates. Once cured, bars typically keep well for 12 to 18 months in a drawer or on a shelf with airflow.
The shelf life is set by the oils rather than by the soap: liquid oils such as olive oil slowly oxidise, which can show as small orange spots and an off smell, and keeping the bars cool, dry and out of sunlight slows this. In a humid bathroom a cured bar can feel slightly damp, because the glycerin in it draws moisture from the air, so keep it on a draining soap dish between uses. Any shea butter left over from the recipe keeps 2+ years when stored properly, away from heat and direct sun, ready for the next batch.
Scaling and Substitutions
Scale the oils, then recalculate the lye. To halve or double the recipe, multiply every oil by the same amount and recalculate the lye from the scaled oils with the same 5% superfat. The table shows the results worked out that way.
| Ingredient | Half batch | Base recipe | Double batch |
|---|---|---|---|
| Shea butter | 8 oz (227 g) | 1 lb (454 g) | 2 lb (907 g) |
| Traditional coconut oil | 8 oz (227 g) | 1 lb (454 g) | 2 lb (907 g) |
| Olive oil | 4 oz (113 g) | 8 oz (227 g) | 1 lb (454 g) |
| Castor oil | 4 oz (113 g) | 8 oz (227 g) | 1 lb (454 g) |
| Sodium hydroxide (lye) | 3.4 oz (95 g) | 6.7 oz (191 g) | 13.4 oz (381 g) |
| Distilled water | 6.7 oz (190 g) | 13.5 oz (382 g) | 26.9 oz (762 g) |
| Lavender essential oil | 1 1/2 tsp (7.5 ml) | 1 tbsp (15 ml) | 2 tbsp (30 ml) |
| Yield | About 2 lb (907 g), 4 to 5 bars | About 4 lb (1,814 g), 8 to 10 bars | About 8 lb (3,629 g), 16 to 20 bars |
Any change to an oil changes the lye, so run a substituted recipe through a soap calculator before you make it. These are the swaps that work best:
- Olive oil: sunflower or rice bran oil can replace it at the same weight, with the lye recalculated.
- Coconut oil: Baraka's Palm Kernel Oil can replace it, with the lye recalculated, and gives a similarly hard bar with quick lather. Palm kernel oil is pressed from the kernel inside the stone of the palm fruit, and it is not the same as red palm oil, which comes from the fruit flesh and would tint the bar orange.
- Castor oil: you can cut it to about 5% of the oils and move the rest to olive oil, for a firmer bar with a little less lather. Recalculate the lye.
- Shea butter: cocoa butter can replace up to half of it for a harder bar, with the lye recalculated.
Customisation Ideas
Change the look and feel, not the oils. None of these ideas changes the oils, so the lye calculation stays as it is.
- Swap the scent by replacing lavender with another skin-safe essential oil, keeping the total within the limit in Essential Oils.
- Add texture with 1 tbsp (15 ml) of ground oats or clay stirred in at trace.
- Top the bars with a pinch of dried lavender buds pressed into the surface after pouring. Buds inside the bar tend to turn brown, so keep them on top.
- Change the mould to individual bar moulds instead of a loaf mould for a different shape.
- Add natural colour with a pinch of clay or botanical powder stirred in before pouring.
- Always recalculate the lye and water with a soap calculator before changing any oil or its weight.
Popular soap calculators (external links; always re-run the recipe before adjusting oils): SoapCalc.net, HSCG Lye Calculator, LyeCalc.com.
Essential Oils
Up to 3 tbsp (45 ml) in this batch. The recipe uses 1 tbsp (15 ml) of lavender for a light scent. For a stronger one you can use up to 3 tbsp (45 ml), because the limit in soap is 1 tbsp of essential oil in total per 16 oz (454 g) of oils, and this batch has 3 lb (1,362 g) of oils. That limit covers all the essential oils in the batch together.
Lavender blends well with cedarwood, rosemary or sweet orange, as long as the total stays within the limit. Add essential oils at trace, not to the hot oils. For an unscented bar, leave the lavender out: the recipe works unscented and nothing else changes.
Application Tips

A light lather goes a long way. Use it like any bar soap for hands, face or body: lather with warm water and rinse well, keeping the lather away from your eyes. Because the bar is rich in conditioning oils, there is no need to scrub hard. A soap dish with drainage helps the bar last longer, and keeping it dry between uses gives it the longest life.
What We Know and How We Know It
Mostly established soapmaking practice. The formulation, temperatures, cure time, storage and troubleshooting come from common practice in the home soapmaking community, and the lye figure is calculated from standard sodium hydroxide values for each oil with a 5% superfat. The descriptions of Baraka's shea butter and coconut oil come from Baraka's own product documentation.
The statement that linalool and linalyl acetate are the main scent compounds of lavender essential oil comes from published research: a 2011 review of lavender essential oil constituents in Planta Medica and a review of Lavandula angustifolia essential oil in Pharmacia. Reports that a cold-process bar feels gentler on the skin are reported experience, not a measured outcome.
FAQ
Three questions makers often ask about this bar. Each answer below is short; the sections above go into more detail.
Soap for sensitive skin
What's a good DIY soap recipe for sensitive skin?
A simple cold-process bar with a high share of conditioning oils, like this one, is a common choice. Here shea butter and olive oil make up half the oils, the glycerin formed during saponification stays in the bar, and there are no added synthetic detergents. For the plainest version, leave the lavender essential oil out: the recipe works unscented and nothing else changes.
Let the bars cure for the full 4 to 6 weeks, because a fully cured bar is milder than a young one. Baraka's shea butter for the recipe is unrefined and handmade at the Konjeihi Women's Enterprise Centre. If your skin reacts to soap, or you have a skin condition, ask a doctor or pharmacist before trying a new one.
Coconut oil and lather
Can I use coconut oil for soap lather?
Yes. Coconut oil is one of the most common oils used for big, bubbly lather in cold-process soap, and it is the main lathering oil in this recipe, at a third of the oils. Baraka's Traditional Coconut Oil is a virgin coconut oil, mechanically pressed, and in soapmaking it contributes hardness and abundant lather.
Most soapmakers keep coconut oil between about 20% and 30% of the oils, because above about 35% the bar can start to feel drying. Castor oil, used here at 17%, steadies the lather that coconut oil starts so the bubbles last longer. If you change the amount of coconut oil, recalculate the lye with a soap calculator before you make the batch.
Curing time
How long does homemade soap need to cure?
Cold-process soap like Baraka's lavender shea butter soap needs 4 to 6 weeks to cure fully. During the cure, the water used to dissolve the lye evaporates, saponification finishes, and the bar hardens and becomes milder, so it lasts longer in the dish. Set the cut bars on their sides on a rack or towel in a cool, dry, well-ventilated place, and turn them now and then so every side dries evenly.
Do not use the soap before the cure is complete. A simple check is to weigh one bar each week: when the weight stops dropping, most of the water has gone. A young bar of this recipe can feel soft because of the olive and castor oils, and it firms up as it cures.
The Impact of Your Purchase
When you make skincare with Baraka ingredients, you are buying from women's cooperatives that earn fair wages and keep traditional processing methods alive. Baraka's 2025 Social and Environmental Impact Report records income opportunities for more than 3,000 women in northern Ghana, over $100,000 invested in women's enterprise infrastructure, and equipment and fuel recovery that have cut the carbon impact of shea processing by up to 90%. At the Konjeihi Women's Enterprise Centre in Ghana's Upper West Region, Baraka's shea butter is made by hand, and the waste left over from making it is dried into fuel blocks that fire the next batch. Baraka also offsets 100% of the carbon cost of shipping to customers. You get full transparency about what touches your skin and your family's skin, and about where it came from.
Meet one of the women behind Baraka's shea butter in this short film: Shea Butter Producer: Zenabo Imoro.
Shop the Baraka Ingredients in This Recipe
Two Baraka ingredients make up the base. Everything else in the recipe is easy to find locally.
Shea Butter | Shop Shea Butter | Baraka's shea butter is unrefined and handmade at the Konjeihi Women's Enterprise Centre, and it gives the bar its hardness, creamy lather and conditioning feel.
Traditional Coconut Oil | Shop Traditional Coconut Oil | Baraka's virgin coconut oil is mechanically pressed and gives the bar its cleansing power and abundant lather.
Browse more ingredients: Butters, Oils and DIY Starter.
Try These Next
More shea butter soaps to make next. Each of these uses the same cold-process skills with a different additive or scent.
- Shea Butter and Turmeric Soap: the same shea butter base with turmeric added, a good next step if you want to try a natural colourant.
- Shea Butter and Goats Milk Soap: a shea butter soap made with goat's milk, for when you are ready to work with milk instead of plain water.
- Honey and Shea Butter Soap: a shea butter bar made with honey, a good next recipe once you are comfortable with this one.
- Creamy Cow Milk and Shea Butter Soap: another milk soap, this time with cow's milk, for a creamy bar.
- Shea Butter and Aloe Vera Soap: a shea butter bar made with aloe vera, a different twist on the same method.
- Coffee and Shea Butter Soap: another cold-process shea butter soap, built around coffee's texture and grounding scent.
- Oatmeal and Shea Butter Soap: a shea-based bar with oats for extra texture.
- Citrus Shea Butter Soap: a brighter, citrus scent if lavender's calm is not what you are after.
- Charcoal and Shea Butter Soap: a dark bar made with activated charcoal on a shea butter base.
- Rose and Shea Butter Soap: a floral alternative using the same shea-based soap fundamentals.
About These Ingredients
This recipe is expanded from our Definitive Guide to DIY with Shea Butter, which explores more formulations, ingredient options and variations. Visit the full guide for more approaches to shea-based DIY skincare.
Disclaimer
The information in this article is for general education. It reflects traditional use, reported experience and, where noted, published research. It has not been evaluated by the U.S. Food and Drug Administration or Health Canada. Baraka products are cosmetics and are not intended to diagnose, treat, cure or prevent any disease or medical condition. Always patch test a new ingredient, keep products away from the eyes and out of reach of children, and speak to a qualified healthcare provider about any skin or health condition. If you add essential oils, use no more than the amount given, and leave them out for young children, during pregnancy and on sensitive skin. Individual results vary.
About the Author
Wayne Dunn is the founder of Baraka Impact and a former Professor of Practice in Sustainability at McGill University. He holds an M.Sc. in Management from Stanford and has spent over 15 years working directly with the Konjeihi Women's Enterprise Centre in Ghana's Upper West Region to source traditionally made shea butter. He shares DIY skincare recipes and ingredient guides designed to be made at home with real ingredients — and sourced with full transparency about where they come from.
Items Featured in this Post
Connect With Us!
































