Traditional Coconut Oil: The Complete Guide — Why Hand-Processing Makes a Difference for Soap and Cosmetics

April 7, 2023
|
Wayne Dunn

Is coconut oil good for your skin? Many people use it on the body, where it absorbs quickly, but its high lauric acid content gives it a moderately high comedogenic rating, so many people leave it off the face. Baraka's virgin coconut oil is unrefined, unbleached and undeodorised, with no solvent extraction. This guide also explains how traditional hand-processing differs from commodity oil, and what that means for soap makers and formulators. For recipes, see Coconut Oil – Ultimate DIY Guide and Recipes.


Is coconut oil good for your skin?

For many people, yes, on the body. Coconut oil is widely used in balms, body butters, lip balms and as a carrier oil. It absorbs quickly rather than sitting on the skin, and many people report that it leaves skin feeling soft.

The catch is the face. Coconut oil is high in lauric acid and is rated moderately comedogenic, which means it can clog pores for some people. That is why many people use it on the arms, legs, hands and feet, and choose a lighter oil for the face. Skin differs from person to person, so start with a small amount and see how yours responds.

For very dry areas such as elbows, heels and hands, many people prefer a richer butter like Baraka shea butter, or blend the two. This is DIY advice, not medical advice. If you have a skin condition, see a doctor or pharmacist.


Coconut oil chemical composition: what is in it

Coconut oil has no single chemical formula. It is a mix of triglycerides, which are fats made of three fatty acids joined to glycerin. The fatty acids are what give the oil its character. Lauric acid, for example, has the formula C12H24O2.

The typical fatty acid profile is the same whatever the processing method:

  • Lauric acid: about 50%
  • Myristic acid: 16–22%
  • Caprylic acid: 6–10%
  • Capric acid: 6–10%
  • Palmitic acid: 8–10%

The coconut decides this profile, not the press. Processing changes the minor compounds instead, which is where traditional methods differ.


What Traditional Hand-Processing Actually Involves

Understanding what 'traditional' means requires understanding the two production routes for coconut oil.

Dry-process (most commercial coconut oil) starts with copra, which is coconut meat dried in the sun or in kilns. The dried copra is pressed with expeller presses, which generate heat and pressure, or processed with chemical solvents to get the most oil out. The oil is then usually refined, bleached and deodorised (RBD), which gives the neutral-coloured, odourless oil common in commercial supply chains. Even oil labelled 'cold-pressed' or 'expeller-pressed' is usually dry-process. 'Cold' refers to lower temperatures than fully refined oil, not to the heat the expeller press itself makes.

Wet-process (traditional hand-processing) starts with fresh coconut meat, not dried copra. The fresh meat is grated and pressed or hand-wrung with water to make coconut milk. The oil is then separated from the milk, traditionally by gentle heating or natural separation, without mechanical expellers or chemical solvents. The result is an oil made entirely from fresh raw material.

The difference between the two is not mainly about what is removed. It is about what is kept.


What Is Preserved in Traditionally Processed Coconut Oil

Traditional wet-process coconut oil production — grating fresh coconut and separating oil from coconut milk without mechanical processing

Processing changes the minor compound content. Traditional wet-process oil is generally said to keep more of these:

Polyphenols are natural antioxidant compounds that high-temperature processing partly breaks down. Traditional wet-process coconut oil keeps more of them than RBD or heavily processed oil.

Tocopherols (vitamin E) are heat-sensitive antioxidants that help an oil stay stable. Gentler processing keeps more of them.

Scent compounds give coconut oil its natural smell. They evaporate at high temperatures, so unrefined oil has a fresher, stronger coconut scent than deodorised oil.

Colour is bright white when the oil is solid, which it is below about 75°F (24°C). Unbleached oil does not have the unnaturally white look of RBD oil, though the visual difference from good expeller-pressed oil can be subtle.

So should you choose refined or unrefined coconut oil for skin? Choose unrefined if you want the natural coconut scent and the antioxidant compounds that heavy processing partly removes. Choose refined if you want no scent. The core fatty acids are the same either way.


Why This Matters for Soap Making

In soap, coconut oil is used for bar hardness and lather. Both come from lauric acid, and both are the same whatever the processing method.

Saponification value (how much lye is needed to turn this oil into soap): 0.183 for coconut oil with sodium hydroxide (NaOH). No oil contains lye. The value is the amount of sodium hydroxide a soapmaker adds per gram of oil. It is one of the highest among common soap oils.

Worked example, 4 oz (113 g) of coconut oil at about 5% superfat:

  1. 4 oz × 0.183 = 0.73 oz of sodium hydroxide for full saponification (113 g × 0.183 = 20.7 g).
  2. Multiply by 0.95 for a 5% superfat: 0.73 × 0.95 = about 0.70 oz (19.7 g).
  3. Water is about twice the lye: about 1.4 oz (39 g).

This is an example of the method, not a full recipe. Always check your own recipe in a lye calculator before you make it. Soaps that are mostly coconut oil, and salt bars, are made on purpose with a higher superfat of 15 to 25%, so they stay gentle.

Usage rate: Coconut oil is typically used at 20–35% in cold-process soap. Below 20%, its contribution to lather and hardness is limited. Above 40–50%, the finished bar can feel drying. Many balanced bars use 25–30% alongside softer oils such as shea butter and olive oil.

Where processing method shows up: Minor compounds influence the sensory quality of the bar, including skin feel. Small-batch soap makers who compare traditionally processed and commodity coconut oil in identical recipes commonly report differences. Soap chemistry itself does not change. For a full soap tutorial, see How Do I Make Simple DIY Shea Butter Soap?


Why This Matters for Cosmetic Formulation

In cosmetics, coconut oil goes into anhydrous balms, body butters, hair oils, lip balms and carrier blends. Its moderately high comedogenic rating does not change with processing.

Stability: The natural polyphenols and tocopherols in traditionally processed oil help slow oxidation, so finished balms and butters tend to keep well. This matters to formulators who avoid synthetic antioxidants.

Scent: Unrefined coconut oil brings its own coconut scent, with no added fragrance.

Sourcing story: Brands that sell on ingredient transparency can point to a named, traditional source. That is a brand decision as much as a formulation one.


What each ingredient does in a simple coconut and shea balm

Here is a simple, unscented body balm to try. It has no water, so it needs no preservative.

  • 2 oz (57 g) shea butter: makes the balm rich and firm.
  • 1 oz (28 g) virgin coconut oil: makes it soft, light and quick to absorb.
  • 1/2 oz (14 g) beeswax or a plant wax: helps it hold its shape.
  1. Melt everything together gently in a heatproof bowl over hot water.
  2. Stir, then pour into a clean jar.
  3. Let it set at room temperature, then close the lid.

Buy the ingredients now

This recipe uses two Baraka ingredients. One click takes both straight to checkout.

Buy both now

Beeswax or a plant wax is not a Baraka product; use your usual supplier.

Store your homemade balm in a cool place, away from water. Use it on the body. Many people leave coconut oil off the face.

How to change the texture

The rule of thumb is simple: butters make it rich, oils make it soft and light, and wax makes it hold its shape.

  • Firmer: add a little more wax or shea butter.
  • Softer or runnier: add more coconut oil, or another liquid oil.
  • Lighter: use more oil and less butter.
  • Richer: use more shea butter.

Coconut oil melts at about 75°F (24°C), so in a hot room a coconut-heavy balm will go soft.

Make It Your Own

These recipes are a starting point, not a rulebook. Use your judgement, be inspired, and don't be afraid to experiment. Everything here is a pure, natural ingredient that blends happily with the others. Start with a small batch, write down what you did, and see how your skin responds. When you find a blend that works for you, make it again.


How Traditional Coconut Oil Compares to Related Ingredients

Coconut oil is high in saturated fatty acids, excellent for soap hardness and lather, and moderately comedogenic on skin.

For how coconut oil compares to shea butter, see Coconut Oil vs Shea Butter: What the Difference Actually Is.

For palm kernel oil, the other high-lauric oil, see Palm Kernel Oil vs Coconut Oil: What the Difference Actually Is.

For red palm oil, see Red Palm Oil vs Coconut Oil: What the Difference Actually Is.

For cocoa butter, see Cocoa Butter vs Coconut Oil: Benefits and Uses Compared.


Sourcing and Availability

Baraka's traditional coconut oil is produced using wet-process methods without chemical solvents, mechanical expellers or high-temperature industrial processing. Chain-of-custody documentation is available on request. For the full account of Baraka's sourcing relationships and social impact, see Baraka's Social and Environmental Impact Report.

For soap makers and formulators who need larger volumes, Baraka Bulk and Wholesale has supply information. Browse the Butters Collection and DIY Ingredients Collection for more traditional oils and butters.


Frequently Asked Questions

What is traditional hand-processed coconut oil?

Baraka's traditional coconut oil is made by the wet-process method. Fresh coconut meat is grated, water is added, and the mixture is pressed into coconut milk. The oil is then separated from the milk without mechanical expellers, chemical solvents or high-heat industrial processing. It differs from cold-pressed and expeller-pressed oil, which are dry-process methods using dried copra.

What is the difference between wet-process and dry-process coconut oil?

As Baraka's guide explains, dry-process oil comes from copra using expeller presses or solvents. Wet-process oil comes from fresh coconut meat at lower temperatures, and is generally said to keep more of its natural compounds.

How does the processing method affect the fatty acid profile of coconut oil?

Baraka's guide notes that it does not change the core profile, with about 50% lauric acid. It affects the minor compounds, such as polyphenols and tocopherols, which high heat partly breaks down.

Why does processing method matter for soap making?

As Baraka's guide notes, the saponification value and core fatty acids stay the same, so the soap chemistry does not change. Minor compounds may influence skin feel, and many small-batch soap makers report differences.

What is the saponification value of coconut oil for soap making?

Baraka's guide gives the saponification value (how much lye is needed to turn this oil into soap) as 0.183 with sodium hydroxide. Check every recipe in a lye calculator before you make it.

How much coconut oil should I use in a soap recipe?

Baraka's guide suggests typically 20–35%. Many balanced bars use 25–30% with softer oils, at about 5% superfat. Mostly-coconut bars use a higher superfat of 15–25%.

Is traditional coconut oil better than cold-pressed for cosmetic formulation?

Traditional wet-process oil, the method behind Baraka's traditional coconut oil, is generally said to keep more natural minor compounds and has a fresher coconut scent. Whether it is better depends on your formula and your sourcing priorities.

Can I use coconut oil as the sole fat in a soap recipe?

According to Baraka's guide, you can. A 100% coconut oil soap is very hard with plenty of lather, but it can feel drying. It is often made as a laundry soap or with a 15–25% superfat. For skin soap, 25–35% coconut oil alongside softer oils works better.

What is Baraka's sourcing story for coconut oil?

Baraka's traditional coconut oil is produced using wet-process methods without chemical solvents, mechanical expellers or high-temperature industrial processing. Chain-of-custody documentation is available on request. For larger quantities, see Baraka Bulk and Wholesale.

How does traditional coconut oil compare to palm kernel oil in soap making?

Baraka's guide explains that both are high in lauric acid and add lather and hardness. Palm kernel oil usually has slightly less lauric acid and more oleic acid, which makes a softer bar. They are often used together.


Quick answers

Is coconut oil good for your skin?

Many people use coconut oil on the body, where it absorbs quickly. Baraka's virgin coconut oil is unrefined and absorbs quickly rather than sitting on the skin. Its high lauric acid content gives it a moderately high comedogenic rating, so many people use it on the body rather than the face.

What are the benefits of coconut oil for skin?

Coconut oil absorbs quickly, keeps its fresh coconut aroma when unrefined, and is used in balms, body butters, hair oils and lip balms. Its natural antioxidants (polyphenols and tocopherols) help keep the oil stable. Baraka's virgin coconut oil is unrefined, unbleached and undeodorised, with no solvent extraction.

Is coconut oil good for dry skin?

Many people use coconut oil as a moisturiser for dry skin, on its own or in body butters and balms. For very dry areas such as hands, feet, elbows and heels, many people prefer a richer butter such as Baraka shea butter, or mix the two. Shea butter is solid at room temperature and melts on contact with skin.

Should you use refined or unrefined coconut oil for skin?

Choose unrefined if you want the natural coconut scent and the antioxidant compounds (polyphenols and tocopherols) that heavy processing partly removes. Refined (RBD) coconut oil is neutral in colour and odourless, and its core fatty acids are the same. Baraka's virgin coconut oil is unrefined, unbleached and undeodorised, with no solvent extraction. More in Why This Matters for Cosmetic Formulation

About the Author

Wayne Dunn is the founder of Baraka Impact and a former Professor of Practice in Sustainability at McGill University. He holds an M.Sc. in Management from Stanford and has spent over 15 years working directly with cooperative relationships in West Africa to source traditionally made butters, oils, and soaps — including traditional coconut oil, one of the most technically specific ingredients in the Baraka range. He shares DIY skincare recipes and ingredient guides designed to be made at home with real ingredients — and sourced with full transparency about where they come from.

View More Articles