Honey and Red Palm Oil Soap
Honey and Red Palm Oil Soap
This red palm oil soap recipe uses Baraka red palm oil, coconut oil, olive oil, honey, lye and water to make a cold process bar. The lye amount is worked out from saponification values, so you can check the math before you start. The steps and amounts are below.
Ingredients:
- Red Palm Oil: 8 oz (227 g)
- Coconut Oil: 4 oz (113 g)
- Olive Oil: 4 oz (113 g)
- Lye (sodium hydroxide): 2.29 oz (65 g)
- Distilled Water: 5 oz (142 g)
- Honey: 0.25 oz (7 g)
- Essential Oils (optional): up to 1 tablespoon in total, per 16 oz (454 g) of oils
Instructions:
-
Prepare the lye solution: Combine lye and distilled water in a heat-resistant container. Stir until the lye is completely dissolved.
-
Melt the oils: Melt the red palm oil, coconut oil, and olive oil together in a double boiler.
-
Combine: Carefully pour the lye solution into the melted oils and blend until the mixture reaches trace.
-
Add honey: Stir in the honey until evenly distributed.
-
Add essential oils: If desired, add up to 1 tablespoon of essential oil in total to the mixture.
-
Pour into molds: Pour the soap batter into your chosen molds.
-
Cure: Allow the soap to cure for at least 4-6 weeks before use.
Buy the ingredients now
This recipe uses two Baraka ingredients. One click takes both straight to checkout.
- Baraka Red Palm Oil, 17.6 oz (500 g): enough for two batches
- Baraka Virgin Coconut Oil, 8.8 oz (250 g): enough for two batches
Lye (sodium hydroxide), distilled water, olive oil, honey and essential oils are not Baraka products; use your usual supplier.
Lye-Water Calculation
Check this calculation in a lye calculator before you make the soap. Using these saponification values (the amount of sodium hydroxide needed to turn each oil into soap):
- Red Palm Oil: 0.142 oz NaOH/oz of oil
- Coconut Oil: 0.183 oz NaOH/oz of oil
- Olive Oil: 0.135 oz NaOH/oz of oil
Step-by-Step Calculations:
- Red Palm Oil (8 oz): 8 oz × 0.142 = 1.136 oz NaOH
- Coconut Oil (4 oz): 4 oz × 0.183 = 0.732 oz NaOH
- Olive Oil (4 oz): 4 oz × 0.135 = 0.540 oz NaOH
Total Lye Amount: 1.136 oz + 0.732 oz + 0.540 oz = 2.408 oz NaOH
Water Calculation: Assuming a water-to-lye ratio of 2:1 (a typical range for cold process soap): 2.408 oz NaOH × 2 = 4.816 oz water
Why Make This Soap: Honey is a natural humectant that helps to draw moisture into the skin, and many people find it suits dry skin. The combination of red palm oil and honey provides a luxurious and nourishing experience. The vibrant red color adds a touch of luxury and visual appeal to this soap.
This Recipe was originally published in "20 DIY Soap Making with Red Palm Oil"
Popular Soap Calculators:
- SoapCalc.net: A widely used online calculator with a user-friendly interface. SoapCalc: http://www.soapcalc.net/
- Handcrafted Soap and Cosmetics Guild (HSCG) Calculator https://www.soapguild.org/tools-and-resources/product-price-calculators/lye
- Lye Calculator: Another popular option with a simple design. https://www.lyecalc.com/
- Soap Recipe Calculator: Offers additional features like fragrance and color calculations. http://thesoapcalculator.com
There are also many YouTube Videos on how to calculate this.
Remember: Always handle lye with extreme caution. It is a strong chemical and can cause severe burns. Ensure you're following safety guidelines when working with it. Red palm oil can stain clothing and towels.
Items Featured in this Post
Connect With Us!
































